---
type: "ReferencePage"
title: "Skandi Seven – Box Cooler Service"
description: "Recoating of 25 box coolers on Skandi Seven in Cape Town. Cleaned, sandblasted, coated and flushed for optimal protection and performance."
canonical: "https://www.nordicgreenproducts.com/references/skandi-seven-box-cooler-service/"
markdown: "https://www.nordicgreenproducts.com/references/skandi-seven-box-cooler-service.md"
site: "https://www.nordicgreenproducts.com"
published: "2025-04-14"
modified: "2025-04-14"
authors: ["Nordic Green Products AS"]
tags: ["Marine cooling systems"]
countries: ["South Africa"]
---
# Skandi Seven – Box Cooler Service

[Home](https://www.nordicgreenproducts.com/) › [Our references](https://www.nordicgreenproducts.com/references/)

By Nordic Green Products AS — 2025-04-14

25 box coolers were serviced on Skandi Seven at Cape Town yard. All units were cleaned, sandblasted, coated, and flushed to ensure full operational readiness.

|  |  |
| --- | --- |
| Location: | Cape Town, South Africa |
| Client: | DOF |
| Vessel: | Skandi Seven |
| Type of work: | Full recoating of box coolers |
| From date: | 01.02.2024 |
| To date: | 13.02.2024 |

### Project summary

NGP was contracted to carry out full surface treatment and coating of 25 box coolers on *Skandi Seven* during docking in Cape Town. The scope included chemical and mechanical cleaning, surface preparation, coating, pressure testing and tube flushing.

## How we worked

All coolers were manually cleaned and treated with NGP’s bio-based, non-toxic cleaning agents. After high-pressure washing and chemical treatment, coolers were air-dried and then sandblasted with Garnet grit #80. Two coats of Säkatonit Extra AR-F Red were applied with 24 hours between coats, followed by full curing and detailed cleaning of tubesheets and internal pipes.

## Results

All coolers were delivered clean, recoated, and ready for service. Some tubes were plugged where required, and all units passed pressure testing. Tube-by-tube flushing ensured complete removal of residues, and the coolers were handed over for reinstallation on schedule.

## What we used

- Garnet grit #80
- Säkatonit Extra AR-F Red (2-coat system)
- NGP Bio Clean (OSPAR/HOCNF/REACH approved)
- Pressurised air and water for internal cleaning
- Full sandblasting and painting setup

## Reflections

This was a high-volume and technically detailed project, managed in close collaboration with the yard and DOF. The result is a fleet of coolers that are fully protected and prepared for long-term performance.

## Skandi Seven

- ![Bilde 4-1-2024, 09 48 01 01](https://media.nordicgreenproducts.com/images/Bilde_4-1-2024_09_48_01_01.width-1200.format-webp.webp)
- ![Skandi Seven](https://media.nordicgreenproducts.com/images/Skandi_Seven.width-1200.format-webp.webp)
- ![Bilde 22-1-2024, 14 36 46](https://media.nordicgreenproducts.com/images/Bilde_22-1-2024_14_36_46.width-1200.format-webp.webp)
- ![Bilde 10-1-2024, 11 12 57](https://media.nordicgreenproducts.com/images/Bilde_10-1-2024_11_12_57.width-1200.format-webp.webp)

Tags: Marine cooling systems

Countries: South Africa